LOCKOUT TAGOUT TRAINING VANCOUVER SURREY BURNABY RICHMOND DELTA LANGLEY VICTORIA BC
British Columbia, BC, Vancouver, Surrey, Burnaby, Richmond, New Westminster, Langley, Delta, Maple Ridge, Coquitlam, Port Moody, Pitt Meadows, White Rock, Mission, Chilliwack, Abbotsford, Whistler, Hope, Squamish, Sunshine Coast, Kelowna, Prince George, Kamloops, Victoria, Langford, Nanaimo, Vancouver Island
![lock out tag out training online certification course worksafebc british columbia bc canada vancouver north west vancouver surrey burnaby richmond delta langley new westminster coquitlam maple ridge abbotsford mission](/uploads/1/2/6/9/12698052/editor/441492_3.jpg?1655838459)
Lock Out / Tag Out Training. Every year, workers in British Columbia are killed or seriously injured because machinery or equipment was not properly locked out. For example, accidents where workers are caught in machinery can result in severed fingers, crushed limbs, or death. Accidents can be prevented if machinery is locked out properly before obstructions are cleared or other maintenance work is done. Electrical shock, burns, and electrocution can also result if electrical equipment is not properly locked out.
Equipment that is not de-energized and locked out can unexpectedly start when maintenance work is being done, which can result in serious injuries. De-energization is the removing of energy from machinery or equipment. Lockout is the use of lock(s) to render machinery or equipment inoperable or to isolate an energy source in accordance with a written procedure. Maintenance is any work performed to keep machinery or equipment in a safe operating condition. This includes installing, repairing, cleaning, and lubricating the equipment, as well as clearing obstructions to the normal flow of material. Working with electricity can be dangerous. Workers performing service or maintenance on machinery and equipment may be injured by the unexpected startup of the machinery or equipment, or release of stored electrical energy in the equipment. In fact, failure to lock out machinery before working on it is a major cause of injury and death. These deaths and injuries can be prevented by establishing and following an effective lockout/tagout program. This training will tell you more about electrical hazards, safe practices when working with electricity, and the lockout/tagout program and how it can save your life. Ideal learners are any employee who works on or around electrical machinery. Testing conducted throughout this online course is designed to reinforce the information presented. A mark of 80% must be achieved in order to pass this course. The course is able to be taken three times in efforts to achieve the pass mark. Printable resources are available in the form of a comprehensive student manual. The manual is a valuable resource for future use and knowledge retention. Upon successful completion of this online course, a certificate of completion will be available for download and printing. This certification has No expiry date.
Equipment that is not de-energized and locked out can unexpectedly start when maintenance work is being done, which can result in serious injuries. De-energization is the removing of energy from machinery or equipment. Lockout is the use of lock(s) to render machinery or equipment inoperable or to isolate an energy source in accordance with a written procedure. Maintenance is any work performed to keep machinery or equipment in a safe operating condition. This includes installing, repairing, cleaning, and lubricating the equipment, as well as clearing obstructions to the normal flow of material. Working with electricity can be dangerous. Workers performing service or maintenance on machinery and equipment may be injured by the unexpected startup of the machinery or equipment, or release of stored electrical energy in the equipment. In fact, failure to lock out machinery before working on it is a major cause of injury and death. These deaths and injuries can be prevented by establishing and following an effective lockout/tagout program. This training will tell you more about electrical hazards, safe practices when working with electricity, and the lockout/tagout program and how it can save your life. Ideal learners are any employee who works on or around electrical machinery. Testing conducted throughout this online course is designed to reinforce the information presented. A mark of 80% must be achieved in order to pass this course. The course is able to be taken three times in efforts to achieve the pass mark. Printable resources are available in the form of a comprehensive student manual. The manual is a valuable resource for future use and knowledge retention. Upon successful completion of this online course, a certificate of completion will be available for download and printing. This certification has No expiry date.
CLASSROOM (4 Hours)
WORKSAFEBC LOCKOUT TAGOUT TRAINING BC SALE $1399.99 + GST per course/set fee (Reg. Price. $1699.99)
Up to 10 participants may attend the course. This course is conducted privately for businesses. Each additional person ( > 10 ) $49.95 per person OUR LOCKOUT TAGOUT CLASSROOM COURSE IS CSA & WORKSAFEBC COMPLIANT TRAINING AND IS VALID FOR BRITISH COLUMBIA VIRTUAL WEB TRAINING VIA ZOOM PLATFORM The following courses will be conducted LIVE by our instructor by ZOOM web training. Each student can have access to a personal PC with internet or you can situate your team in a classroom and project our instructor from an audio/video setup. We do not proovide in person training. During this training course the instructor will conduct face-to-face training along with powerpoint presentations, worksafebc workbooks, forms and instructional videos. ** Time Frame: 8:00 am to 12:00 Pm (4 Hours) ** 2 x 15 Minute Coffee Breaks ** CSA Standards and WorkSafeBC OHS Regulation compliant ** Certificates will be issued by email after completion of course ** Course materials and workbooks will be emailed prior to course ** Cancellation Policy: Contact us at least 5 days prior to your class for a full refund. If course is cancelled within 5 days prior to your class, a $300.00 instructor time/wage fee will be charged to the client. ** A written final exam is required for all participants ** Invoicing or Credit Card Payment Available Instructor: Gagan Grewal, Dipl. T. OHS BCIT Gagan, has over 23 years of professional occupational health and safety experience across BC and many other parts of Canada, including the United States. He holds a Diploma of Technology in OHS from BCIT and is considered, by his peers, the most recognized OHS consultant and trainer with businesses and legislative authorities across BC. Learn more about Gagan HERE.
|
ONLINE
LOCKOUT TAGOUT TRAINING (90 Minutes) SALE PRICE OFFER EXPIRES ON JULY 26, 2024
SALE $49.99 CAD + GST PER STUDENT Reg. Price $62.95
Course Length: 90 Minutes PLEASE VIEW HOW TO PURCHASE COURSES VIDEO BELOW PRIOR TO PLACING YOUR ORDER. THIS COURSE IS SELF-PACED & YOU CAN DOWNLOAD AND PRINT YOUR CERTIFICATION UPON COMPLETION
|
Call Us: (604) 243-2585
|
LOCK OUT TRAINING VANCOUVER VICTORIA SURREY BURNABY RICHMOND LANGLEY DELTA COQUITLAM MAPLE RIDGE |
Our true passion is to assist our clients in achieving a total occupational safety and health program and to achieving compliance with WorkSafeBC OHSR / WCA regulations & OSHA law and regulations (WISHA). Whether you are a small, medium or large organisation in Vancouver, BC or Washington State, Western Safety and Health Consulting has a wide range of occupational health and safety consulting services to suit any organization. Our Occupational Health and Safety Consultants are experienced professionals and can assist your organization for any workplace safety needs you may have including health and safety program development and site health and safety audits.
We also offer a wide array of health and safety training courses.